CONTROL UNIT The KX-TDA50 control unit is initially configured with 4 Super Hybrid Extension Ports and 4 Loop Start CO ports (1 LCOT card), Power Supply, RS-232 port, USB port, MOH port, Paging port and a SD card. The system is expandable to 8 COs and 24 Extension ports. Please refer to the KX-TDA50 Capacities Chart #5.

Features
• Multi-Cell Wireless
• VOIP Gateway with QSIG (Enhanced System Networking)
• PC-Based Programming
• DXDP (Digital Extra Device Port)
• Automatic Route Selection (ARS)
• Toll Restriction
• Caller ID Name & Number to (DPT, APT & SLT)
• Voice Mail Integration
• Uniform Call Distribution (UCD)
• Compatible with KX-T7600, 7400, 7700 Series and SLT Telephones
• Direct Inward System Access (DISA)

CONTROL UNIT Maximum Capacity 96 ports Contains: 1 Cabinet with 5 Free Slots 1 Main Processor Unit– (Power Supply Not Included; See page 3) 1 SD Card

Features
• Multi-Cell Wireless
• VOIP Gateway with QSIG (Enhanced System Networking)
• VOIP Extensions
• PC-Based Programming
• DXDP (Digital Extra Device Port)
• Automatic Route Selection (ARS)
• Toll Restriction
• Caller ID (Name & Number)
• ISDN Primary Rate Interface (PRI) with QSIG
• T1
• Voice Mail Integration
• Uniform Call Distribution (UCD)
• Direct Inward System Access (DISA)

CONTROL UNIT Maximum Capacity 192 ports Contains: 1 Cabinet with 10 Free Slots 1 Main Processor Unit– (Power Supply Not Included; See page 3) 1 SD Card

Features
• Multi-Cell Wireless
• VOIP Gateway with QSIG (Enhanced System Networking)
• VOIP Extensions
• PC-Based Programming
• DXDP (Digital Extra Device Port)
• Automatic Route Selection (ARS)
• Toll Restriction
• Caller ID (Name & Number)
• ISDN Primary Rate Interface (PRI) with QSIG
• T1
• Voice Mail Integration
• Uniform Call Distribution (UCD)
• Direct Inward System Access (DISA)

19” BRACKET FOR THE KX-TDA50 For mounting the KX-TDA50 cabinet in a 19” rack.

19” Bracket for the KX-TDA100 For mounting the KX-TDA100 cabinet in a 19” rack.

19” BRACKET FOR THE KX-TDA200 For mounting the KX-TDA200 cabinet in a 19” rack.

L-TYPE POWER SUPPLY Large plug in system power supply for use in the KX-TDA200 basic shelf. To determine the correct size power supply for your application, please refer to the Power Supply Sizing Chart #1.

M-TYPE POWER SUPPLY Medium plug in system power supply for use in the KX-TDA100 or KX-TDA200 basic shelf. To determine the correct size power supply for your application, please refer to the Power Supply Sizing Chart #1.

S-TYPE POWER SUPPLY Small plug in system power supply for use in the KX-TDA100 basic shelf. To determine the correct size power supply for your application, please refer to the Power Supply Sizing Chart #1.

4-PORT CELL STATION INTERFACE CARD (CSIF4) Required for multi-cell operation when using the (KX-TDA0142) 3-channel Cell Station. Supports up to 4 (KX-TDA0142) Cell Station. One card requires one free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

8-PORT CELL STATION INTERFACE CARD (CSIF8) Required for multi-cell operation when using the (KX-TDA0142) 3-channel Cell Station. Supports up to 8 Cell Stations (KX-TDA0142). 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

8-PORT DIGITAL HYBRID LINE CARD (DHLC8) 8 ports per card. Supports KX-T7600, KX-T7400 (DPT), KX-T7700 (APT) series telephones. Single Line (SLT), DSS console and KX-T0141, 2 Port Cell Station. 2 ports provide power failure transfer. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

8-PORT DIGITAL LINE CARD (DLC8) 8 ports per card. Supports KX-T7600 and KX-T7400 series telephone (DPT), DSS console and KX-T0141, 2 Port Cell Station. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

16-PORT DIGITAL LINE CARD (DLC16) 16 ports per card. Support KX-T7600 and KX-T7400 series (DPT) Telephones, DSS consoles and KX-T0141, 2 Port Cell Station. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

8-PORT SINGLE LINE CARD (SLC8) 8 ports per card. Supports single line telephones (SLT). 2 ports are equipped with power failure transfer and 8 DTMF receivers. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

16-PORT SINGLE LINE CARD (SLC16) 16 ports per card. Supports single line telephones (SLT). 4 ports are equipped with power failure transfer and 16 DTMF receivers. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

16-PORT SINGLE LINE CARD WITH MESSAGE WAITING (MSLC16) 16 ports per card. Supports Single Line Telephones with and without Message waiting lights. 4 ports are equipped with power failure transfer. Also equipped with 16 DTMF receivers. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

16-CHANNEL IP EXTENSION CARD (IP - EXT16) The KX-TDA0470 is required when using IP Telephones (KX-NT136). Each KX-TDA0470 card requires one free slot and supports up to 16 KX-NT136 IP extensions. A maximum of 4 cards can be installed in the KX-TDA100 and 8 can be installed in the KX-TDA200. Please refer to System Capacities Chart# 2 & 3 prior to configuring a system.

8-PORT LOOP START CO TRUNK CARD (LCOT8) 8 ports per card. 2 ports have power failure transfer. 1 card requires 1 free slot. 1 optional (KX-TDA0193) 8 port caller ID card can be mounted to support caller ID. Please refer to System Capacities Chart #2 prior to configuring a system.

16-PORT LOOP START CO TRUNK CARD (LCOT16) 16 ports per card. 4 ports have power failure transfer. 1 card requires 1 free slot. Up to two optional (KX-TDA0193) 8 port caller ID cards can be mounted to support caller ID. Please refer to System Capacities Chart #2 prior to configuring a system.

T1 TRUNK CARD (T1) 24 ports per card. Channels assignable as LCO, GCO, DID, OPX or TIE (E&M). ANI and DID Supported. External Channel Service Unit (CSU) required. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

ISDN PRIMARY RATE INTERFACE (PRI 23) 23 ports per card. 23 B channels + 1 D channel. External Channel Service Unit (CSU) required. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

4-CHANNEL IP GATEWAY CARD (IP-GW4) Supports up to 4 IP connections for TDA system networking. H.323V.2, ITU-T, G.711 G729a and G.723.1 compliant. Web programming LAN interface 10 base T/100BASE T. 1 card requires 1 free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

16-CHANNEL IP GATEWAY CARD (IP GW16) Supports up to 16 IP connections for TDA system networking. H. 323V.2, ITU-T, G711, G729a and G.723.1 compliant. 1 card requires 1 free slot. Please refer to system capacities chart # 2 & 3 prior to configuring a system.

BLANK SLOT COVER Optional metal panel to cover unused free slots. One panel covers one slot. 5 panels per package.

MEMORY EXPANSION CARD (MEC) FOR TDA100/200 For use with the KX-TDA100/200 only with version 1.1 or higher software. Required when double capacity DXDP is used. Please refer to the Memory Expansion Requirements Chart #6

OPTIONAL 3-SLOT BASE CARD (OPB3) This card is equipped with 3 connectors to receive the following option cards: 4 Channel Message Card (MSG4), 4-Port Doorphone Card (DPH4), and the 16-Port Echo Cancellation Card (ECHO16). Requires 1 slot. Mounts in the optional card slot or a free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

4-CHANNEL MESSAGE CARD (MSG4) Provides 4 ports for outgoing messages for DISA, Queuing, Wake-Up and internal hold melody. A maximum of 64 messages can be recorded with a maximum total recording time of 8 minutes. Mounted on the KX-TDA0190 (OPB3) card. Please refer to System Capacities Chart #2 prior to configuring a system.

4-PORT DOORPHONE CARD (DPH4) Required to connect doorphones (KX-T30865 and KX-T7775). Supports up to 4 doorphones and door opener relays. Mounts on the KX-TDA0190 (OPB3) card. Please refer to System Capacities Chart #2 prior to configuring a system.

4 EIO CARD (EIO4) Mounts on the KX-TDA0190 Optional 3-Slot Base card (OPB3). Contains 4 dry contact that allows you to control external devises such as a door strike or an automatic garage door-opener. You can also connect up to 4 external sensor devises.

16-PORT ECHO CANCELLATION CARD (ECHO16) Provides echo cancellation for conference calls for up to 16 ports. Mounts on the KX-TDA0190 (OPB3) card. Please refer to System Capacities Chart #2 prior to configuring a system.

CTI LINK CARD Ethernet card for CTI communications via 10Base T for programming using LAN or WAN. Contains one RJ-45 connector. One card requires 1 slot. Mounts in the optional card slot or a free slot. Please refer to System Capacities Chart #2 prior to configuring a system.

REMOTE CARD Analog modem card for remote communication. V.90 support. Mounts on the main processor card (MPR) Please refer to System Capacities Chart #2 prior to configuring a system.

SINGLE LINE EXTENSION CALLER CARD (SLT CID) Mounts on the KX-TDA0173 8 Port Single Line Extension Card (SLC8) only. Allows the system to pass caller ID information to single line devices. Requires TDA version 2 software or higher. Supports Bell/ETSI FSK only

8-PORT CALLER ID CARD (CID8) Required to receive Caller ID information from the CO. Each KXTDA0193 activates caller ID on 8 CO lines. Mounts on the KX-TDA0180 and KX-TDA0181 Loop Start CO Cards. Please refer to System Capacities Chart #2 prior to configuring a system.

4-PORT HYBRID LINE CARD (HLC4) 4 ports per card. Supports KX-T7700 (APT) series telephones, Single Line (SLT) and DSS console, (KX-T0141) 2 port Cell Station and Voice Mail. Maximum one per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

4-PORT DIGITAL LINE CARD (DLC4) 4 ports per card. Supports KX-T7600, KX-T7400(DPT) series telephones, DSS console, (KX-T0141) 2 port Cell Station and Voice Mail. Maximum one per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

8-PORT DIGITAL LINE CARD (DLC8) 8 ports per card. Supports KX-T7600 & KX-T7400 (DPT) series telephones, DSS console, (KX-T0141) 2 port Cell Station and Voice Mail. Maximum two per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

4-PORT SINGLE LINE CARD (SLC4) 4 ports per card. Supports single line telephones (SLT). Also equipped with 4 DTMF receivers. 1 card max per system. Please refer to KXTDA50 System Capacities Chart #5 prior to configuring a system.

8-PORT SINGLE LINE CARD (SLC8) 4 ports per card. Supports single line telephones (SLT). Also equipped with 8 DTMF receivers. 2 cards max per system. Please refer to KXTDA50 System Capacities Chart #5 prior to configuring a system.

4-PORT PROPRIETARY LINE CARD (PLC4) 4 ports per card. Supports KX-T7700 series (APT), DSS and Voice Mail. 1 card max per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

8-PORT PROPRIETARY EXTENSION CARD (PLC8) 8 ports per card. Supports KX-T7700 Series (APT), DSS and Voice Mail. 2 cards max per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

4-PORT LOOP START CO CARD (LCOT4) 4 ports per card. 2 ports have power failure transfer. 1 optional (KXTDA5193) 4 port caller ID can be mounted to support caller ID. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

VOIP GATEWAY CARD (IPGW4) Supports up to 4 IP connections for networking the KX-TDA50 to other KX-TDA systems. H.323V.2, ITU-T, G729a, G.723.1 and G711 compliant. 1 card max per system. Please refer to KX-TDA50 System Capacities Chart #5 prior to configuring a system.

MEMORY EXPANSION CARD (MEC) FOR TDA50 For use with the KX-TDA50 only with version 1.1 or higher software. Required when DXDP is used. Please refer to the Memory Expansion Requirements Chart #7

4-PORT DOORPHONE / DOOR OPENER CARD (DPH4) Support up to 4 doorphones (KX-T30865 or KX-T7775). Also equipped with 4 dry contacts for connection to electric door strike or other compatible type equipment. Maximum 1 per system.

8-CHANNEL ECHO CANCELLER CARD (ECHO8) Provides echo cancellation for conference calls for up to 16 ports. Max 1 per system

EXTENSION CALLER ID CARD (EXT-CID) Required to pass Caller ID to Single line telephone, fax answering machines etc. Supports up to 8 SLT devises. One card per system. Mounts in any of the optional slots.

4-PORT CALLER ID CARD (CID4) Required to receive Caller ID information from the CO. Each KXTDA5193 activates caller ID on 4 CO lines. Mounts on the KX-TDA5180 Loop Start CO Card.

REMOTE CARD (V.90) (RMT) Modem card for remote maintenance and programming. Maximum 1 per systems

ADDITIONAL AC POWER SUPPLY Optional external power supply required when over 4 KX-T7000, 7200, 7300, 7400, 7700 series telephones and over 4 KX-T0141 Cell Stations are installed. Please refer to the KX-TDA50 Capacities Chart #5

2-CHANNEL MESSAGE CARD (MSG2) Provides 2 ports for outgoing messages for DISA, Queuing, Wake-Up and internal hold melody. A maximum of 32 messages can be recorded with a maximum total recording time of 8 minutes.

PC PHONE SOFTWARE Software to make a PC emulate as a TDA telephone/extension. Includes 5 user licenses. Requires KX-T7601 USB Expansion Module.

CTI/NETWORK SYSTEM APPLICATION SOFTWARE FOR TDA100/200 SD Card that contains software to support Enhanced CTI functions and network DSS/BLF operation. Requires version 2.0 software.

CTI/NETWORK SYSTEM APPLICATION SOFTWARE FOR TDA50 SD Card that contains software to support Enhanced CTI functions and network DSS/BLF operation. Requires version 2.0 software.

2-CHANNEL CELL STATION (CS) 2 port cell station for use with multi-cell wireless feature in the KX-TDA50, 100 and 200. The KX-T0141 connects directly to an extension port, compatible with DHLC8, DHLC16 and HLC4 cards in the KX-TDA 100/200 and the 4 initial Super Hybrid Ports, DLC4 and DLC8 cards in the KX-TDA50. Please refer to Charts #2 and #5 for maximum capacity information.

Black 

DIGITAL 24-BUTTON SPEAKERPHONE

Proprietary Telephone
• 24 programmable CO keys with dual color LEDs
• Volume key
• Hands-free Speakerphone
• Large message/ringing lamp (red/green)
• Headset jack
• XDP/DXDP Jack for adding another KX-T7600 DPITS or SLT extension