Inter-Tel Axxent - From the attendant telephone
  • While the phone is idle, enter "9800". Display shows "DATE:"
  • Enter Date MM:DD:YY. Press "#" to skip date entry.
  • The display will show "TIME". Enter the time in 12-hour format.
  • The display will then show: "Press 1 for AM, press 2 for PM". Select one.
  • Press "#" to exit.

 

 

Inter-Tel Axxess - Networked Systems Only - From the attendant telephone
  • While on hook, enter the Set Network Date and Time feature code (9810). Your displays the current date.
  • If you do not need to change the date, press "#" or ACCEPT to skip to the time prompt.
  • Use the dialpads to enter month day and year mm-dd-yy format.
  • If you make a mistake, press "MUTE" to backspace or "*" to start over.
  • Use the dialpad buttons to enter the time in hours and minutes "0900" for 9:00.
  • If 12-hour display is used, the display shows AM or PM. Press "1" for AM and "2" for PM.

 

 

Inter-Tel Axxess - Non-Networked Systems - From the attendant telephone
  • While on-hook, enter "9800" for Set Date/Time feature. The current date will display.
  • Press "#" to skip. To change, use keypad to enter the month, day and year (010305=January 3, 2005). The new date will display.
  • Use keypad keys to enter the time in hours and minutes (0900=9:00).
  • If the system is set for 12-hour format, the display will show SELECT AM OR PM (AM=1 PM=2). Select 1 or 2.
  • The display reads, "SYSTEM DATE AND TIME UPDATED".

 

 

Inter-Tel GLX-PLUS
Time
  • While on-hook, press "SPCL" and enter the Program Time/Date feature code (4)
  • Enter the Program Time feature code (1). Display will show TIME XX:XX
  • Enter the 2-digit number for hour (00-24) and 2-digit for minutes (00-59).
  • Lift and replace the handset.
Date
  • While on-hook, press "SPCL" and enter the Program Time/Date feature code (4).
  • Enter the Program Date feature code (2). Display will show DATE DAY MON XX
  • Press "*" until the correct day is displayed. Press "#". Repeat for month and date.
  • Lift and replace the handset.
Year
  • While on-hook, press "SPCL" and enter the Program Time/Date feature code (4).
  • Enter the Program Date feature code (3). Display will show YEAR:XXXX.
  • Enter 4 digits for the year (0000-9999).
  • Lift and replace the handset.

 

 

Inter-Tel IMX 1224/2460

  • While on-hook, press the "SPCL" key and enter the set time of day feature code (021). Display will show "SET TIME OF DAY".

  • Use the keypad to enter the time in hours and minutes. Then press "*" for AM or "#" for PM. Display will show "SET DATE MM:DD:YYYY".
  • Use the keypad to enter the month, day and year. Backspace to correct mistakes by using the "MUTE" key. Display will show "SET DAY OF WEEK SUN".
  • Select the day of the week by scrolling through the selections. Press "#" to go forward and "*" to go back. When the desired day is displayed, press the "SPKR" key to end.