Nortel Phone System
Nortel Norstar System  

800-475-0989

www.nhtelecom.com

Norstar Compact ICS Release 6.1MR (Maintenance Release) (2004)

A Compact ICS is a flexible building-block design expands with your business easily and cost-effectively. The CICS expands from a 4x8 to an 8x24 capacity.

Hardware

• Two slots for universal 4x0 LS/DS or 4x0 CI trunk cartridge

• One expansion slot for 8 port TCM station expansion

• Up to 16 stations built in to main KSU

• Compact space saving design with built in power supply.

• Two 50-pin male amphenol connections for interconnections cables for the stations and lines ,the amphenols is also used for connection of external devices such as Music on Hold source, loudspeaker paging and a relay contact for auxiliary ringers.

• Built in analog terminal adapter (1) The Internal Analog Terminal Adapter ( I- ATA) provides one connection for a modem, fax machine or analog telephone and does not take up a station port from total number of the digital stations.

• Built in remote access device software dependable (IRAD) Once the IRAD is enabled, Norstar Remote Utilities software, allows remote programming for adds, moves, changes and troubleshooting. Moves, adds and changes can now be done from a remote site

• Supports Voice mail
• Integrated Automated Attendant
• Computer telephony integration (CTI)
• Supports all Norstar and Business Series Terminals.
• Calling Line Identification (CLID)
• Direct Inward System Access (DISA) for remote dial-in
• Auto Daylight Savings Time
• Paging
• Music on Hold
• Automatic Set Relocation
• Toll Restriction

The administration or the programming can be done from any extension on the system with M7310 phone or a larger phone. Or by using a computer with NRU (Norstar remote utility) software and connect to the FastRad either directly through a serial connection or remotely using a line.

Features for 6.1MR (Maintenance Release)

The following features were introduced with the CICS 6.1MR

• The enhanced Call log feature allows you to log all calls to a telephone, or to gather logs for specific lines assigned to a telephone.
  The Call log set feature allows you to determine which assigned lines will collect logs.

• The second dial tone table allows the user to enter up to 10 one to four digit numbers that, when dialed, will cause the system to produce a second dial tone, at which time the user can enter the remaining call digits

• 7316E digital phone upgrade note: On systems prior to 6.1, the 7316E acts as a 7316 digital phone. When upgrade to 6.1 or newer software occurs, the 7316E reconfigures as a 7316E, which means that any memory button programming is lost. As well, line button, Answer DN, and intercom assignments shift to the 7316E defaults.

Voicemail Capabilities:

• Call pilot all releases (release 2.0 or higher recommended)
• Star talk flash release 2.0 or higher
• Norstar Application module (NAM) releases.4.1

ACD application

• Flash ACD release 2.0
• Call pilot ACD
• ACD Minuet release 1.3
• ACD Prelude, Cinphony I, Cinphony II Release 3.6 or higher

Norstar Remote Utilities (Remote programming options)

• Norstar remote utility (NRU) release 10 or higher

Desktop application

• CTA 100
• CTA 150i (Discontinued)
• CTA 160i
• CTA 200
• CTA 500 (Discontinued)

• LS/DS Analog Trunk Cartridge
• Caller ID Trunk Cartridge
• Combination Services Cartridge
• Services Cartridge (DISCONTINUED)
  *  2-port U Interface ISDN-BRI
  *  4-port U Interface ISDN-BRI
  *  4-port S/T Interface ISDN-BRI

Auxiliary Equipments:

• Door phone and Door opener controller (DOC)
• SMDR6
• ATA 2
• Fast RAD and fast RAD2
• VMI
• T24 KIM module
• Central Answering Position (CAP) module
• Busy Lamp Field (BLF) Module (M7310 must be at least release 18 or higher in order to work correctly)
• Polycom Audio conference unit (ACU)
• Norstar VOIP Gateway unit
• DS30 station port adapter

Telephone sets:

• M7100
• M 7208
• M7310
• M7410
• M7324
• T7100

• T7208
• T7316 (the first 6 button will not function as a line button only as a feature button)
• T7316E
• T7406