| Features
All features of release 6
New Features 6.1
- Key Indicator Module (KIM) and T7316E
Business Series Terminal (BST) create a Central Answering Position (CAP).
These two pieces of hardware are designed to replace the M7324/CAP
setup. The T7316E can also be deployed as a stand-alone unit, and
works the same way as previous versions of the T7316 with some minor
changes, including an active hands free key below the main dial pad.
The KIM can be used in two configurations. The ordinary KIM (OKIM)
has the same functionality as the current unassigned CAP module. The
enhanced KIM (eKIM) supports multiple lines, including target lines,
and hunt group appearances. Up to four KIMs can be attached to a
T7316E, without requiring a supplementary power supply. A T7316E can
only support
a maximum of four eKIMs, however, it can support
up to nine OKIMs, with the addition of a station auxiliary power supply
(SAPS). The system can support one CAP with an eKIM. This number will
include any T7324- based CAP installations you might already have. The
system can support any number of CAPS using OKIMs. T7316E telephones and
KIMs also provide call-specific icons to make call tracking easier. You
cannot program Answer DNs onto a KIM.
Destination code enhancements
12-digit destination code: You can specify up to 12 digits as a
destination code, which allows you to support user expectations of
dialing requirements for existing systems. For instance, if your users
are used to dialing 91XXX-XXX-XXXX for a long distance call, they can
continue to do so, so you can provide a seamless transition to network
dialing
Multiple least-cost routing: When you specify a schedule other than
Normal for a destination code, you can specify up to three possible
routes the call can access, in order of preference. The system tries the
first route, and if that route is not available, the system moves to the
next route, and so on
Silent monitor for hunt groups
Your Hunt group supervisors can now monitor hunt group calls, either
silently, or by providing a conference tone to indicate that the call is
being monitored, Other new functionality has been added to allow you to
determine which telephones will be allowed to silent monitor, how many
monitoring telephones your system will allow and what password is
required to enter a monitoring session
CLID display enhancements: display an incoming call CLID on a telephone
with activated CLID display, where a call is currently active.
Voicemail Capabilities:
- Call pilot all releases (release 2.0 or
higher recommended)
- Star talk flash release 2.0 or higher
- Norstar Application module (NAM) release 4.1
ACD application
- Flash ACD release 2.0
- Call pilot ACD
- ACD Minuet release1.3
- ACD Prelude, CinphonyI, Cinphony II
Release3.6 or higher
Norstar Remote Utilities (Remote programming
options)
Norstar remote utility (NRU) release 10.0 or
higher
Desktop application
- CTA 100
- CTA 150i (Discontinued)
- CTA 160i
- CTA 200
- CTA 500 (Discontinued)
Hardware Compatibilities:
Modules:
- LS/DS Analog Trunk Cartridge
- Caller ID Trunk Cartridge
- Combination Services Cartridge
- Services Cartridge (DISCONTINUED)
* 2-port U Interface ISDN-BRI
* 4-port U Interface ISDN-BRI
* 4-port S/T Interface ISDN-BRI
Auxiliary Equipments:
- Door phone and Door opener controller (DOC)
- SMDR6
- ATA 2
- Fast RAD and fast RAD2
- VMI
- T24 KIM module
- Central Answering Position (CAP) module
- Busy Lamp Field (BLF) Module (M7310 must be
at least release 18 or higher in order to work correctly)
- Polycom Audio conference unit (ACU)
- Norstar VOIP Gateway unit
- DS30 station port adapter
Telephone sets:
- M7100
- M 7208
- M7310
- M7410
- M7324
- T7100
- T7208
- T7316 (the first 6 button will not function
as a line button only as a feature button)
- T7316E
- T7406
|
