Key
popular features include:
- Supports Voice mail
- Integrated Automated Attendant
- Computer telephony integration (CTI)
- Supports all Norstar and Business Series
Terminals.
- Calling Line Identification (CLID)
- Direct Inward System Access (DISA) for remote
dial-in
- Auto Daylight Savings Time
- Paging
- Music on Hold
- Automatic Set Relocation
- Toll Restriction
The administration or the
programming can be done from any extension on the system with M7310
phone or a larger phone. Or by using a computer with NRU (Norstar remote
utility) software and connect to the FastRad either directly through a
serial connection or remotely using a line.
Features:
-
All features of release 5
New Features 6.0:
-
Distinctive ring for lines and hunt groups
You can now assign distinctive ring patterns (DRP) to both lines and
Hunt groups. This is similar to the feature that allows you to
assign Different rings to your telephone so you can distinguish
which phone is ringing. All three of these features work in concert
with each other. Which ring will be used depends on the priority
that is assigned to each, and the order in which the assignment
occurred.
System wide call appearance feature codes (SWCA) Sixteen new feature
codes allow you to assign indicator memory Buttons with SWCA codes.
These buttons provide call appearance for both incoming and outgoing
calls to any group of telephones with the same assigned buttons.
This allows a call to be parked on a SWCA button, and then the call
can be retrieved by any other member of the Group.
Calls are assigned to the SWCA buttons, either automatically or
manually, at the telephone that receives or makes the call. This
frees up the line for other calls while maintaining an appearance of
the call in the group. Refer to Setting SWCA controls on page 209.
CLID display enhancements, alpha tagging using system speed dial,
codes increased to 200 Alpha tagging is an enhancement to the CLID
functionality of the System. This feature matches incoming calls
with system speed dial Entries. If enough digits match (CLID match),
and the telephone is set to receive name display, then whatever name
is entered into the system speed dial for that number will display
as CLID when the call comes in.
Due to the expansion of the system speed dial feature codes up to
255, the personal speed dial list has been changed to codes 256 to
279 (24 codes (no change from existing systems).
Voicemail Capabilities:
- Call pilot all releases
- Star talk flash release 2.0 or higher
- Norstar Application module (NAM) releases 4.
1
ACD
application
- Flash ACD release 2.0
- Call pilot ACD
- ACD Minuet release 1.3
- ACD Prelude, CinphonyI, Cinphony II Release
3.6 or higher
Norstar
Remote Utilities (Remote programming options)
- Norstar remote utility (NRU) release 9.1 or
higher
Desktop
application
- CTA 100
- CTA 150i (Discontinued)
- CTA 160i
- CTA 200
- CTA 500 (Discontinued)
Hardware Compatibilities:
Modules:
- LS/DS Analog Trunk Cartridge
- Caller ID Trunk Cartridge
- Combination Services Cartridge
- Services Cartridge (DISCONTINUED)
* 2-port U Interface ISDN-BRI
* 4-port U Interface ISDN-BRI
* 4-port S/T Interface ISDN-BRI
Auxiliary Equipment:
- Door phone and Door opener controller (DOC)
- SMDR6
- ATA 2
- Fast RAD and fast RAD2
- VMI
- Central Answering Position (CAP) module
- Busy Lamp Field (BLF) Module (M7310 must be
at least release 18 or higher in order to work correctly)
- Polycom Audio conference unit (ACU)
- Norstar VOIP Gateway unit
- DS30 station port adapter
Telephone sets:
|
