Panasonic System KX-TA 824 System Features

Nortel Phone System
Nortel Norstar System

877-648-3532

www.nhtelecom.com

Norstar Modular ICS Release 6.1 MR (Maintenance Release) software (2004)
The Norstar Modular ICS targets businesses that use more than 20 telephones and require capabilities that allow for more power, more growth and more advanced applications. It can start as small as 4x32 (4 lines and 32 extensions). The Modular ICS can support analog or digital lines, including ISDN BRI and T1/PRI for high-speed voice and data applications. With XC software installed, Modular ICS capacity increases to 272 ports and supports integrated Companion wireless for full capability.
Hardware Capabilities:
32 Digital station ports built into KSU (using one pair of wires for each extension) Two slots for Trunks: * 4x0 LS/DS * 4x0 Callers ID * Digital trunk card Software slot * 2 slots for expansion Supports the following expansion cards: (combination depends on software) * Two port fiber expansion * Six port fiber expansion * Slim fiber combo card * Service card
Power supply is built in and field replaceable. The system has a built in connections for music on hold, loud speaker paging and relay contact for auxiliary ringers. Three 50-pin male amphenol connections for interconnections cables for the stations and lines the amphenols are also used for connection of external devices such as Music on Hold source, loudspeaker paging and a relay contact for auxiliary ringers. The Norstar Modular ICS (MICS) telephone system is a fully expandable and flexible system that will not only be a workhorse in your office, but also has the capacity to expand as your needs grow. It will grow in both sizes as functionality, so your initial investment is always protected. Norstar Integrated Communications Systems offer a portfolio of telephone/key systems, with solutions for small-to-medium businesses and branch offices, The Norstar Modular ICS can start with just a few incoming lines and telephones and grow to up to 272 ports (224 stations) in various combinations of lines and expansion levels, including 60 Companion wireless telephones. Every Norstar Integrated Communications System (ICS) is a fully digital platform that brings all of your communications together right at your desktop - including fax, e-mail, computer, and telephones. Voice Mail, Call Center Applications, integrated mobility, Internet access, ISDN and Desktop CTI are just a few of the options that can be added to the system for greater service to your business. All additions to the system integrate seamlessly into the operation of the MICS system. The administration or the programming can be done from any extension on the system with M7310 phone or a larger phone Or by using a computer with NRU (Norstar remote utility) software and connect to the FastRad either directly through a serial connection or remotely using a line.
ICS Release 6.1 MR(Maintenance Release) (2004)
Features and enhancements:
All features of release 6.1 with correction to some bugs in the s/w with some added enhancements The following features were introduced with the MICS 6.1MR (Maintenance Release) * The enhanced Call log feature allows you to log all calls to a telephone, or to gather logs for specific lines assigned to a telephone. * The Call log set feature allows you to determine which assigned lines will collect logs. The second dial tone table allows the user to enter up to 10 one to four-digit numbers that, when dialed, will cause the system to produce a second dial tone, at which time the user can enter the remaining call digits. * Profiles 1 and 4, PRI: The Send Name Display feature allows you to specify if you want the business name and OLI to be transmitted over specific PRI lines. - On systems prior to 6.1, the 7316E acts as a 7316 digital phone. When upgrade to 6.1 or newer software occurs, the 7316E reconfigures as a 7316E.